Overview for Shower enclosures
Glass clamps
The glass clamps for fixed panels are manufactured from grade SUS 304 stainless steel (plates 45mm wide by 48mm high) with stainless steel clamping screws and water impenetrable gaskets.
All are suitable for 6mm (please specify), 8mm, 10mm and 12mm glass. The wall mounted clamps are supplied with stainless steel screws and wall plugs. The clamps require 16mm ø holes to be drilled in the glass.
Glazing Channels
Our Range of Glazing channels are designed to ensure a high quality professional looking installation is achieved at all times.
Both a conventional and a dry glaze option is
available.
GX Hinge System
With four door configurations, different hinge designs and two finishes, offering the designer a wide range of options.
With the majority of the components in stock, we also
satisfy the demands of the glazier or installer.
G tech hinge system
A contemporary system for internal doors and partitions - also suitable for shower enclosures (8 and 10mm only).
Manufactured from solid stainless steel (grade 304) with a superb satin finish.
Glass Thickness: 8, 10 and
12mm
Maximum door width: 950mm
Maximum door weight: 55kg
54 Hinge System
With a variety of door configurations, different hinge designs and finishes, we offer the designer a wide range of options.
With the majority of the components in stock, we also satisfy the demands of the glazier or installer.
Knobsets and handles
Four knobsets and one tubular handle all specifically
designed for shower enclosures.
Support bars
The tubular bar, connectors and supports are manufactured from stainless steel.
All are suitable for 6, 8 and 10mm glass only
No drilling is required to the glass.
Seals for showers
These long lasting seals are manufactured from clear PVC.
They are supplied in 2200mm lengths (unless otherwise
specified) and snap on to the glass (except type
LJ).
